Network cable LAN cable CAT6 UTP 23AWG ethernet network cable, ethernet cable 8p8c foil shielded, ground wires, 305m/box, PVC/LSZH jacket, 250/500 MHz, network link Test pass 90m.
Certification: UL, ETL, CE, RoHS, REACH, ISO9001
Quality warranty.
Network Link Test Pass, UL, ETL, CE, RoHS, ISO9001 approved !
Construction (CAT6 UTP (U/UTP))
Conductor: Solid bare copper / CCA Diameter: 0.57mm / 23AWG
Insulation: PE Average thickness ( +/-0.03mm): 0.24mm
Insulation Dia ( +/-0.03mm): 1.01mm Min point thickness: 0.2mm
Cross:
Jacket: PVC or LSZH Average thickness: 0.55
Outer Dia( +/-1.0mm) 6.2 Min point thickness: 0.53
Rip cord: YES
Core color:
Pair 1: Blue - white/blue Pair 2: Orange - white/orange
Pair 3: Green - white/orange Pair 4: Brown - white/brown
Application
1000BASE-T Gigabit Ethernet 500MHz Broadband Video
10BASE-T, 100BASE-T Fast Ethernet (IEEE 802.3) Voice, T1, ISDN
100 VG - AnyLAN(IEEE802.12), 155/622 Mbps ATM Patch Cord
Standard Compliances
All Category 6 Requirements as Per ANSI/TIA/EIA, ISO/IEC, and CENELEC EN Standards:
ANSI/TIA/EIA 568-B.2 2ND Edition ISO/IEC 11801 Class D
CENELEC EN 50173-1 IEC 61156-5, CENELEC EN 50288-2-1 Horizontal Cable
Flame Retardancy is Verified According to IEC 60332-1
Electrical Performance (2500MHz)
1.0-100.0MHz Impendance(ohms) 100+/-15 1.0-100.0MHz Impendance delay screw(ns/100m) <45
Pair to Ground Capacitance Unbalance (PF/100m) 330Max Conductor DC resistance 20%(ohms/km) <72
Resistance Unbalance(%): 5 Spark Test 850 V AC
Dielectric Strength 2500 V DC / 3 seconds Insulation Resistance Test Min. 150 MΩ /Km
Conductor Resistance Max. 9.38Ω /100m at 20 Resistance Unbalance Max. 5%
Capacitance Unbalance Max. 330 pF/100m Mutual Capacitance Max. 5600 pF/100m
Network Link Test Reports (CAT6 0.51mm Copper)
Package
305m or 152.5m pull box, other length in plastic reel or wooden reel available upon request.
Why choose us - advanced production line & management system
We, SHG produce the quality, we focus on quality in our over 20 years growing.
Certificates
CE, RoHS, UL, ETL, ISO9001
Characteristics
1.0-100.0MHz Impendance(ohms) 100+/-15 1.0-100.0MHz Impendance delay screw(ns/100m) <45
Pair to Ground Capacitance Unbalance (PF/100m) 330Max Mutual Capacitance Max. 5600 pF/100m
Conductor DC resistance 20%(ohms/km) <93.8 Resistance Unbalance(%): 5
Spark Test 850 V AC Dielectric Strength 2500 V DC / 3 seconds
Insulation Resistance Test Min. 150 MΩ /Km Capacitance Unbalance Max. 330 pF/100m
Test object: Jacket Test Material: PVC, PE, LSZH
Before Tensile strength(Mpa): >=13.8 Aging Elongation ((%): >=100
Aging condition(C xhrs): 100x240 After Tensile strength(Mpa): >=85% of unaged
Aging Elongation(%): >=50% of naged
Standard Compliance
All Category 5e Requirements as Per ANSI/TIA/EIA, ISO/IEC, and CENELEC EN Standards:
| Electrical Characteristics |
| Impedance : (1-100MHz) 100±15Ω |
|
|
|
|
Delay Shew (ns/100m) ≤ 25 ns/100m |
|
|
|
|
| |
(100-250MHz) 100±18Ω |
|
|
|
Velocity of Propagation (%) = 74% |
|
|
|
|
| |
(250-600MHz) 100±25Ω |
|
|
|
Unbalanced-to-ground capacitance ≤ 330pf/100m |
|
|
|
|
Transmission Properties:
| Frequency [MHz] |
1 |
10 |
16 |
20 |
31.25 |
62.5 |
100 |
300 |
600 |
| Typical values (attenuation) [db/100m] |
1.8 |
5.2 |
6.8 |
7.7 |
9.6 |
13.8 |
17.5 |
31.5 |
45.0 |
| Typical values (NEXT) [db/100m] |
>100 |
>100 |
>100 |
>100 |
>100 |
>100 |
98.0 |
93.0 |
89.0 |
| Typical values (PSNEXT) [db/100m] |
98.0 |
98.0 |
98.0 |
98.0 |
98.0 |
98.0 |
96.0 |
91.0 |
87.0 |
| Typical values (ELFEXT) [db/100m] |
93.0 |
93.0 |
93.0 |
93.0 |
90.0 |
86.0 |
84.0 |
65.0 |
45.0 |
| Typical values (PSELFEXT) [db/100m] |
91.0 |
91.0 |
91.0 |
91.0 |
88.0 |
84.0 |
82.0 |
63.0 |
43.0 |
| Typical values (RL) [db/100m] |
26.2 |
34.7 |
36.3 |
35.7 |
36.3 |
36.1 |
36.1 |
31.7 |
27.5 |
| Typical values (ACR) [db/100m] |
98.2 |
94.8 |
93.2 |
92.3 |
90.4 |
86.2 |
80.5 |
61.5 |
44.0 |
Audited Supplier 
){kind=link}
){kind=link}